This example generates three phase alternating currents from a voltage source inverter in an open loop manner. It can be used in a grid-forming application.
This article covers the control of a single phase solar PV inverter using Fictive Axis Emulation (FAE) and its implementation on a programmable power converter.
The note introduces an example of Direct Torque Control (DTC) for an electric drive using a permanent magnet synchronous motor (PMSM) and a programmable inverter.
This note shows a possible control for a grid tied back to back converter. The proposed control implements active damping of the LCL filter.
This example implements the control for a three-phase PV inverter. The system uses a boost in order to interface the PV panel with the intermediate…
This application note details a possible control implementation on the B-Box RCP for a fast electric vehicle charger with intermediate storage. In this example, the…
The note introduces an electric car motor control strategy. The system is tested on a back-to-back motor testbench with car emulation.
The note introduces a wind turbine generator control technique with sensorless algorithm. The system is tested on a back-to-back motor testbench.
This application presents a multi-converter system with three DC/AC converters connected to a micro-grid. This could typically represent three photovoltaic inverters sharing a single PCC…
This note introduces a conventional control for Modular Multilevel Converters (MMC). The converter is used in a DC/AC inverter configuration and is connected to the three phase grid.
End of content
End of content